塑胶球场施工中塑胶层起泡现象分析|新利娱乐18|网球场施工|展奥体育设施工程有限公司
加入收藏 设为首页 企业邮箱
新利娱乐18_新利18APP_18新利官网登录手机版
全国服务热线
 159 0174 5510
0512-3686 8426
展奥新闻
联系展奥

新利国际平台登录:0512-3686 8426
手机:18626901874
联系人:刘小姐
邮箱:info@

体育新闻
塑胶球场施工中塑胶层起泡现象分析
关键词: 塑胶球场施工中塑胶层起泡现象分析    发表时间:2017-01-21    浏览量:1110    来源:长葛展奥
塑胶材料是一种应用非常普遍的材料,这种材料具有耐磨性好、弹性好、硬度适中、纸滑等优点。因此在各大学校、运动会田径赛场跑道、球场等场所施工中得到广泛应用。是但前学校、体育场馆非常常见的一种跑道及球场类型,这种跑道及球场类型,在实际施工过程中会遇到不少问题的,给整个跑道及球场施工质量造成影响,严重情况下甚至会对人身造成危害。下面就塑胶球场施工过程中塑胶层起泡问题进行分析:
  Plastic material is a very common material, this material has good wear resistance, good elasticity, moderate hardness, paper slip and other advantages. Therefore, it has been widely used in the construction of track and field track and stadium in various universities and games. But before school, the stadium is one of the most common types of the stadium and the runway, the runway and the stadium, in the actual construction process will encounter many problems, the impact to the whole track and stadium construction quality, severe cases may even cause harm to the human body. The plastic layer on the plastic floor in the construction process of the analysis:
  首先,塑胶球场施工中塑胶层气泡,同基础脱层。这一问题主要是出现在塑胶层做完之后不久,刚刚做完就出现局部或者大面积起鼓,严重情况下则是会出现同基础脱离开来的问题。塑胶球场施工中这一问题的产生往往是由于水泥标号不合格、隔水气层不合格或者是地下水气上升从而使得塑胶层顶起,使得塑胶层出现了起鼓现象。对于这样一个问题应该引起高度重视。起鼓现象的出现说明了在实际施工过程中时存在着一定问题的,塑胶球场施工方法和施工工艺有待调整。
  First of all, plastic stadium construction of plastic layer bubble, the same layer off. This problem is mainly in the plastic layer done soon after, just finished on the local or a large area of the drum, in serious cases will appear with the foundation from the problem. The plastic pitch in the construction are often due to substandard cement grade and water resisting layer is not qualified or underground water vapor rise so that the plastic layer from the top end, so that the plastic layer appeared bulge. We should attach great importance to such a problem. The emergence of drum phenomenon shows that there are some problems in the actual construction process, the construction method and construction technology of plastic stadium need to be adjusted.
  对于塑胶球施工中这种问题的处理,同起泡问题的处理方法基本类似。先是要割掉起泡部分,晒干之后再来进行基础防水处理。然后就是要根据要求来补平,然后要补色差。对于这种问题的预防主要是要做好基础防水质量关。PU塑胶铺设过程中同样是需要对空气湿度以及基础含水率来进行严格控制。只有进行严格控制才能够真正满足时间需要。
  The treatment of this problem in plastic ball construction is similar to that of foaming process. The first is to cut off the foam part, again based water treatment and then dried in the sun. Then it is necessary to fill in accordance with the requirements, and finally to fill color. For the prevention of this problem is to do a good job of basic waterproof quality. PU Plastic laying process is also the need for air humidity and moisture content to strictly control. Only strict control can really meet the needs of time.
展奥首页 关于展奥 展奥产品 新利国际平台登录 展奥售后 展奥新闻 联系展奥
新利国际平台登录:0512-3686 8426 手机:159 0174 5510 联系人:刘小姐 邮箱:info@ 分享:
在线咨询
点击这里给我发消息
点击这里给我发消息
合作伙伴 :站长工具 - 新利娱乐18_新利18APP_18新利官网登录手机版